BBS水木清华站∶精华区
发信人: suning (苏宁~~小坏蛋), 信区: Linux
标 题: Intel 810 Mainboard Ulities LinuxServer Setup[1]
发信站: BBS 水木清华站 (Fri Apr 14 15:56:11 2000)
Intel 810 Mainboard Ulities Linux Server Installation[1]
Multimedia Enjoy Times!!
Nerv.org
1. First we decided to install Video card server on Linux.
We think youhave already done this:
1. install the Xwindow system on you computerand linux console work
smoothly.
2. Know how to type a command line in the console //:P
3. Know how to use the dialog box supplied by system. //:p
2. What we need:
1. Linux 2.2[we recommended Redhat 6.2 or 6.1 version]
2. Intel 810 Video card server for Linux :
We can find it on
ftp floder at: /pub/driver/i810/ at 166.111.160.18
Or other Ftp site on Cernet or Chinanet.
[Note] Do not use the driver supplied by Intel corp.It is very hard to g
et
the driver to work. Always does not work and very difficult to
compile.
We need such files:
[Redhat 6.0]
I810Gtt-0.1-rh60.i386.rpm
XFCom-i810-glibc2.1-1.0.0-rh60.i386.rpm
[Redhat 6.1 or uppervision]
I810Gtt-0.1-rh61.i386.rpm
XFCom-i810-glibc2.1-1.0.0-rh61.i386.rpm
3.Start Installation!!
Now the exciting moment coming!
After three lines we entered, we will begin enjoying the X window
Server On Linux!
[Command Lists]
Note: You just need excute these Commands line by line,pay attention to
the Notes to each command.(Red hat 6.0 In default,We will
provide the coreponding command in each Note:
1 ] RPM -i I810Gtt-0.1-rh60.i386.rpm
Note[ Redhat6.1] :
RPM -i I810Gtt-0.1-rh61.i386.rpm
2 ] RPM -i XFCom-i810-glibc2.1-1.0.0-rh60.i386.rpm
Note [Redhat6.1] :
RPM -i XFCom-i810-glibc2.1-1.0.0-rh61.i386.rpm
3 ] ln -s /usr/X11R6/bin/XFCom_810 /usr/X1R6/bin/XF86_SVGA
Note:
Most time System will reported that XF86_SVGA already exists.
This Does Not matter.We backup it to another directory.T
hen remove
this file :XF86_SVGA and excute this command again.(i)
4 ] XConfigurator
Note: Now we start to config the video card:
1). In the first dialog box we need to select the videocard:
[Redhat6.0] Riva 128 [Redhat6.1] Intel740
2 Select your Monitor type:
This is up to your monitor type,from redhat6.0 it supports
a lot of monitor.[We have a Acer acerview 54e also can
be
finded in Linux lists.] So select you monitor type yourself.
3) Now the system will confirm you to probe the server you
selecte:
@Select [Probe]
Now we can see the screen blinkS.It means we have install the
X server successfully. ln the following we will see the Xwindow.
and there is a time limit for you to confirm the X window work
or not.
@Select [Yes]
@Select [Yes]/[NO]
Linux will confirm you if you want to
change your raphic.Here the selection up
to you favoriate. We
recomended you to select No to use console login. If you
need X window ,just type "startx".
@OK
Now we finished confiure the X window System and it will work
now.
4. Finished, Enjoy now!
After the Configurator,will exit to console mode. Type startx. X wind
ow Runs up
now!
PS:
Platform Manufature
Intel 810 PW65D DFI
64MB RAM IBM
10.GB IBM
Accer view 54e Accer
Redhat6.0/6.1 Redhat
PS:
The next section we will show how to use OSS(open sound system) to configu
re
the intergrated soundcard[Intel810 board]
--
※ 修改:·suning 於 Apr 14 16:03:12 修改本文·[FROM: 211.69.207.148]
※ 来源:·BBS 水木清华站 smth.org·[FROM: 211.69.207.148]
BBS水木清华站∶精华区